This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

QoS Implementation

Hi all,

I'm looking for some advise on how Astaro handles QoS and if this will work for me.

My situation is as follows:

I have IP TV which is handled by my modem. Ethernet feeds split of to my TVs from there.

I then would connect my modem to Astaro.

From Astaro I would have 4 links to different networks. DMZ, LAN, wireless...etc. 

I need to be able to control bandwidth so no particular network/user can hog all bandwidth, however I'm not interested in restricting a user from using all of it if no one else is using it. 

Further I'd need to put priorities for VOIP, DNS, http or bulk traffic...etc. 

I do however need to CAP the total internet bandwidth available to all of the networks behind Astaro as to make sure the IP TV does not get interrupted. [:)]

Is this possible? If so firstly would I apply to the WAN link or Apply to each internal interface?

Thoughts, help, info, greatly appreciated!

Need more info please ask. 

Thanks!


This thread was automatically locked due to age.
Parents
  • Hi,
    DNS will be handled if you use the "Upload Optimizer" setting.

    You can create a bandwidth pool for HTTP.
    If you're using the http proxy, the Traffic Source should be your External Interface.

    However, if everything's from one source machine, that machine's internal traffic/QOS rules will probably have much more effect than anything on the firewall.

    Barry
Reply
  • Hi,
    DNS will be handled if you use the "Upload Optimizer" setting.

    You can create a bandwidth pool for HTTP.
    If you're using the http proxy, the Traffic Source should be your External Interface.

    However, if everything's from one source machine, that machine's internal traffic/QOS rules will probably have much more effect than anything on the firewall.

    Barry
Children
No Data