Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 1105 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Accessing pc's on other network.

touchwood
Simply - I have 2 networks running behind the firewall.

I need to access a 10.10.10. network PC from a 192.168.1. PC

I have given consideration to adding another Nic and bridging. 
But I also found a post suggesting setting up a packet rule to do this. Obviously this would be easier if possible.

Any info gladly received.

Thankyou


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to BarryG
    Create a packetfilter rule allowing traffic FROM the 192 PC, TO the 10 PC, with whatever services are needed.

    Barry



    Hi Barry - thanks for the prompt response.

    That was the first thing I tried - The Pc's  are on the different workgroups and I am trying to utilise UTM to connect.

    When I cannot connect I thought I would get a message in the Firewall log but none shows up.

    Rgds
  • 0 in reply to touchwood
    Several possibilities here...

    You can enable logging on the firewall rule. This will show you if the rule is accessed or not. By default firewall rules will not show in the log. So it might be that the rule is working since you do not get any messages in the firewall log.

    Check if the default gateway for the PC's on both subnets is correct. They should either point to the Astaro interface on the same subnet, or they should point to a router which then knows how to route the traffic to astaro. If no gateway is set, then you need to set this.