This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

What to set for ISDN speed

What would be the correct numbers I enter for a QOS rule to asure at lest a ISDN speed of 64KB. I know the number to enter is not in KB?

Is it Guaranteed Bandwidth: 512 kbit/s (max 1024 kbit/s)?

This thread was automatically locked due to age.

0 BarryG over 13 years ago

IIRC, ISDN is 64kbits.

Set whatever minimum you need, in kbits.
You don't need to set a maximum unless you want to always cap the bandwidth, even if there is no other traffic.

Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 MarkMurphy over 13 years ago

Thank you Barry
Cancel
Vote Up 0 Vote Down

Cancel
0 MarkMurphy over 13 years ago

Berry, I am still unsure of the correct settings based on what flow monitor shows and what the QOS screen shows. In the flow monitor the measure seems to be in K/Bytes as KB is capitalized and it the QOS screen it seems to measure in k/bits as shown in the 2 attached screen shots. Does flow monitor have a different Measure?
Cancel
Vote Up 0 Vote Down

Cancel