This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Torrent wont work in Astaro Home V8

Hi,

I'm having big problems getting UTorrent to work. 

What i have done is this. 

Network Definitions : inzane-pc - 10.95.22.56
Service Definitions : Utorrent : 19810

Firewall 
Any IPv4 - External (WAN) (Network)
Utorrent (19810)

DNAT
Traffic Selector : Any -> Utorrent -> Internal (Address)
Destination : inzane-pc -> Utorrent

Have playing around with different settings but no go. Have disabled IPS but no effect. 
Where am i going wrong ?


This thread was automatically locked due to age.
Parents
  • Your Outgoing service definitions aren't right... should be e.g.

    TCP+UDP
    source port: 6881
    dest port: 1-65535

    Also, why do you have 4 different ports?
    uTorrent can be configured to only use 1.

    Barry
  • i have 4 ports open cause its keep dropping packets .. lik this..

    drops.jpg
  • i have 4 ports open cause its keep dropping packets .. lik this..

    [ATTACH]7733[/ATTACH]


    See if you can set your bittorrent client to only use one Source Port.
    uTorrent can do this (and does so by default, iirc).

    I'm not sure about your freezing issue, could be a NIC problem, or could be caused by high RAM or CPU or connection use on the firewall... check the hardware and network graphs.

    Barry
Reply
  • i have 4 ports open cause its keep dropping packets .. lik this..

    [ATTACH]7733[/ATTACH]


    See if you can set your bittorrent client to only use one Source Port.
    uTorrent can do this (and does so by default, iirc).

    I'm not sure about your freezing issue, could be a NIC problem, or could be caused by high RAM or CPU or connection use on the firewall... check the hardware and network graphs.

    Barry
Children
No Data