This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

QoS for NoxoniRadio

Hi Astaro guys,

please can someone give me a step by step guide to create a working QoS rule for the Noxon iRadio in my WLAN network? I created one, but it doesn't work, from time to time (approx. every 2 min.) the audio stream to the Noxon stoped for few second. My configuration:
Astaro v8.203
1x External_DSL (Standard Ethernet con. with DSL Modem)
1x LAN  (Standard Ethernet, 100Mbit)
1x DMZ (Standard Ethernet, 100Mbit)
1x DMZ_2 (Standard Ethernet, 100Mbit)
1x WLAN (54Mbit, AP10 on DMZ_2)

On each Interface "uplink limit", "Download Equalizer" and "Upload Optimizer" is activated. Downlink and Uplink are set.
The NoxioniRadion is in the WLAN network.
I want to create a QoS rule that give the audio stream to the Noxon a guaranteed bandwidth of 250kbit/s.

Can anybody help?

Matti


This thread was automatically locked due to age.
Parents
  • You can't really QoS the *incoming* Downlink to your ASG because you already got the packets from the ISP, they're already transmitted - nothing useful to control here. QoS can only throw away already downloaded packets which slows down these connections "wasting" your bandwidth, but this will never work out to really control downloads because of re-transmits saturating your link even more.

    QoS can only effectively queue uplink traffic *leaving* your ASG (towards the Internet).
Reply
  • You can't really QoS the *incoming* Downlink to your ASG because you already got the packets from the ISP, they're already transmitted - nothing useful to control here. QoS can only throw away already downloaded packets which slows down these connections "wasting" your bandwidth, but this will never work out to really control downloads because of re-transmits saturating your link even more.

    QoS can only effectively queue uplink traffic *leaving* your ASG (towards the Internet).
Children
No Data