This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SIP Proxy on V8.202

Hi,

I want to use an Aastra 6755i on via the SIP proxy to connect to a VOIP provider. The voip provider uses two netwerk ranges 91.*195.*160.*0 and 91.*195.*161.0 and the dns name sip.sipnl.net for their VOIP service.

I activated the VOIP/Sip proxy function.
In the Sip Server networks I made a network goup that consist of those two  networks including the DNS name, sip.sipnl.net.
In the SIP client network I've put the internal network.

My question is, how do I correctly configure the Aastra. 
These are my current settings:

sip mode: 0
sip proxy ip: 192.168.1.254 # IP address or FQDN of proxy
sip proxy port: 5060 # port used for SIP messages on the
sip registrar ip: sip.sipnl.net
sip registrar port: 5060
sip registration period: 900
sip backup registrar ip: 0.0.0.0 # Do not show No Service
sip contact matching: 2
 
Is this correct? Adnd what about RTP packets?

The problem that I have often one way audio, and when parking a call and pick it up again I have the same issue, audio is gone.

If checking the firewall logs I see that UDP packets in the 3*** range hit the firewall. Aren't they passed through by the proxy ( I think its RTP traffic).
How to forward them to all my internal SIP phones than?

Thanks


This thread was automatically locked due to age.
Parents
  • Astaro sip server helps you only for easy nat on port 5060 
    I used it but it will confuse your rules

    I just use packet rules and nat rules and works fine with my pbx inside, phones are outside and inside. check the forums of your pbx for what port to open and to forwoard
    Example 3CX uses 9000:9028 for RTP
Reply
  • Astaro sip server helps you only for easy nat on port 5060 
    I used it but it will confuse your rules

    I just use packet rules and nat rules and works fine with my pbx inside, phones are outside and inside. check the forums of your pbx for what port to open and to forwoard
    Example 3CX uses 9000:9028 for RTP
Children
No Data