Hi, im pretty new to Astaro, i used Cisco ASA5505 before but it died in a powerfailure at my house so now i trying to set up a Astaro with two NIC's. One for internal LAN and one WAN. The scenario is as following:
There is no "private" computers in this LAN, only three servers hooked up to a Cisco 3560 switch that connects to the ASTARO. The WAN NIC gets its connection to the Internet from a fiberconverter thats on DHCP from my ISP and have 30/30Mbit. I've also hooked up a Cisco AIR-1131AG radio to the LAN just to get a wireless "management" to the equipment there.
Now i've got internet access on LAN and everything seems just fine. I've set up one server that have the right access for the users that needs to connect to it from the outside, all fine.
However i got major problems with my Teamspeak 3 server (TS3). Its a Windows 2003R2 server that runs the TS3, it uses ports 30033 (TCP), 10011(TCP) and 9987(UDP). I've setup DNAT that allows incoming traffic on these ports to the spesific TS3 server "Traffic selector -->ANY--->TS3 servicegroup--->Eksternal WAN (address)" and "Destination translation --->TS3 server"
hooked on the Automatic firewall rule but still it doesnt work.
The server has internet accesss but i cant get access to it from the outside.
I've done the same settings (with diff. ports and services) to the other server and it works as a charm. Any ideas what i can do? [:S]
This thread was automatically locked due to age.
