This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Failover events in an active-passive Cluster

Hi all,

i have 2 nodes (N1, N2) in an active-passive HA (v7.x , the latest version). Heartbeat goes through a dedicated NIC with x-cable. 

Node N1 is connected with several uplinks to Switch1, Node N2 is also connected with the same # of uplinks to Switch2. The 2 switches are trunked, means that the 2 switches have all VLANs shared.

The final question :-)

Node N1 is active, N2 is passive. Switch1 goes offline = all Uplinks on Node N1 are going down. This should be a failover event. Orly? Nope?

If not, how to get it with the least amount of effort? It will be a bunch of trouble to re-cable the whole thing :-/
One idea is (just thinking about that): Connect Heartbeat NIC from Node N1 to Switch1 VLAN99. Also connect Heartbeat from Node N2 to Switch2 in VLAN99 (remember, both switches trunked). If Switch1 goes offline, the heartbeat has gone and Node N2 can do a failover? If Switch2 should go offline nothing happens, because Node N1 is already active.... ? Hm. 

thx all for reading, and much more for good answers :-)


This thread was automatically locked due to age.
Parents
  • Link Aggregation will not require another license.  You would still be in active/passive mode (Hot-Standby).  Link Aggregation, like bridging, is a part of the base functionality.

    Cheers - Bob
  • Ok? Well... uhm... seems like i have to spend some days for research how to bring all that together. I'll give all the information i got from u both to my boss, hoping that he will plan some days for research bout that.

    Again, thanks for ur help [:)]
Reply
  • Ok? Well... uhm... seems like i have to spend some days for research how to bring all that together. I'll give all the information i got from u both to my boss, hoping that he will plan some days for research bout that.

    Again, thanks for ur help [:)]
Children
No Data