Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 1924 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[8.103] SNAT + Masquerading not working

mbulles
Hi,

I have my astaro running with multiple ip addresses.

I'm trying to use SNAT or masquerading so that my mailserver uses a specific public ip  address on the internet.

First tried with masquerading:

Network: I choosed the ip of my mail server
Interface: External (WAN)
IP Address: 213.125.x.y (is enabled for outside usage)

See attachment 1

I enabled this masq. rule, but the server is still using the Firewall's ip address instead of this specific defined address.

I also tried a SNAT rule, but no success.

See attachment 2

Who can help? Or is this a V8.103 bug???

Thanks already.
However


This thread was automatically locked due to age.
Parents
  • 0
    Hi, it should work with the MASQ for the LAN, and one SNAT for each camera.

    Note that SNAT is for OUTBOUND traffic, and if you're trying to connect to the cameras remotely you need a DNAT for each cam.

    Barry
Reply
  • 0
    Hi, it should work with the MASQ for the LAN, and one SNAT for each camera.

    Note that SNAT is for OUTBOUND traffic, and if you're trying to connect to the cameras remotely you need a DNAT for each cam.

    Barry
Children
No Data