Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 877 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Basic Port Forwarding

rylo
I have a DVR behind the ASG120 and I am just trying to forward the port 10053 to it.  Here is my config

Packet Filter
Source: Any
Service: DVR [TCP/UDP D:10053 > S:10053]
Destination: DVR [Host Internal 192.168.1.53]
Action: Allow

NAT Rule
Traffic Source: External (WAN) [208.x.x.x]
Traffic Service: DVR [TCP/UDP D:10053 > S:10053]
Traffic Destination: Internal Network 192.168.1.0/24

NAT Mode: DNAT (Destination)
Destination: DVR [Host Internal 192.168.1.53]
Destination Service: DVR [TCP/UDP D:10053 > S:10053]

[unchecked] Log Initial Packets
 [checked] Automatic packet filter rule

Any suggestions?


This thread was automatically locked due to age.
Parents
  • 0
    The Packet filter rule looks correct. The NAT rule is incorrect, it should be something like this:

    Source: ANY
    Service: 10053
    Traffic Destination: External (WAN) Address
    Destination: 192.168.1.53

    Also, does the service use 10053 for source or destination or is one suppose to be a range of ports?
  • 0 in reply to dilandau
    The 10053 port is what I am using for the DVR's web port to access remotely.  I know that the request packets destination would use port 10053 but unsure about the rest
Reply Children
No Data