Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 2 subscribers
  • Views 3000 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Set up servers with public IP

talbengal
Using ASG120
Firmware version: 8.102
eth0 - internal - 192.168.1.0/24
eth1 - External NTL
eth2 - internal - connect to Vigor2820 via switch with 5 public IP.

I would like all to go via ASG (from eth2) but when I do this all my servers lossing the public IP.

Can someone point me to the right configuration setting?


This thread was automatically locked due to age.
Parents
  • 0
    I have 2 connection NTL is a cable connection + ADSL with 5 public IP address.
    The cable connection (NTL) connect directly to ASG eth1.
    The ADSL to ASG eth2 via switch to Vigor 2820 and the 4 servers with the public IP address.
Reply
  • 0
    I have 2 connection NTL is a cable connection + ADSL with 5 public IP address.
    The cable connection (NTL) connect directly to ASG eth1.
    The ADSL to ASG eth2 via switch to Vigor 2820 and the 4 servers with the public IP address.
Children
No Data