This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Access Camera DVR behind ASG220

Greetings: Our company network is behind an ASG220  V7. I have been delving into the configuration panels and need a little help navigating to a solution:

We have a security camera dvr in place at with a fixed ip of (10.1.1.33). I currently access the DVR using VPN and all is fine. Now, I need to configure for a more public access allowing for some outside sales activities. 

Need to allow access from  multiple dynamic outside ips directly to the DVR  using ie6 browser that uses an active X  program to view the various cameras. I assume that means access through tcp port 80. Once the browser connects to the DVR a username/password window appears. Afterwards there appears to be traffic on port 34567. 

I would much appreciate any advice on a way to accomplish this (and some configuration guidance) while still maintaining  a decent firewall.  

Thanks in advance


This thread was automatically locked due to age.
Parents
  • Hi, you'd need a DNAT for port 80 on the EXT interface, changing the destination to the camera, and firewall rules to allow the http traffic to the camera.

    If you're worried the camera isn't secure enough, you can use a dynamic DNS service on the sales computers, and put the DNS name in a network definition, and use it in the firewall rule.

    Barry
Reply
  • Hi, you'd need a DNAT for port 80 on the EXT interface, changing the destination to the camera, and firewall rules to allow the http traffic to the camera.

    If you're worried the camera isn't secure enough, you can use a dynamic DNS service on the sales computers, and put the DNS name in a network definition, and use it in the firewall rule.

    Barry
Children
No Data