Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 20 replies
  • Subscribers 2 subscribers
  • Views 104532 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sip and SSip problem

equintana
Hi,

I have a new voip server with some ports opened. I configured:
 Traffic selector: Any → SIP → WAN (Address)
 Traffic selector: Any → SIP over SSL →WAN (Address)

Where Wan is the interface to outside.

This config works and I can telnet from outside and connect, but this  pbx software, has a firewall test which tries to telnet from server´s ip:5060/5061 to a external server:3478.

And fails...
Default DROP  UDP  192.168.157.213:5060→96.9.132.83:3478

I added a firewall rule from this computer to ANY for sip and ssip but same error reported. any idea?

regards


This thread was automatically locked due to age.
Parents
  • 0
    No.. you are wrong. The  pbx software is the sip server at 192.168.157.213. To test this sip server, there is an internal option called "Firewall Test" which test some ports 5060 5061 etc etc to stun.3cx.com
Reply
  • 0
    No.. you are wrong. The  pbx software is the sip server at 192.168.157.213. To test this sip server, there is an internal option called "Firewall Test" which test some ports 5060 5061 etc etc to stun.3cx.com
Children
No Data