Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 20 replies
  • Subscribers 2 subscribers
  • Views 104523 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sip and SSip problem

equintana
Hi,

I have a new voip server with some ports opened. I configured:
 Traffic selector: Any → SIP → WAN (Address)
 Traffic selector: Any → SIP over SSL →WAN (Address)

Where Wan is the interface to outside.

This config works and I can telnet from outside and connect, but this  pbx software, has a firewall test which tries to telnet from server´s ip:5060/5061 to a external server:3478.

And fails...
Default DROP  UDP  192.168.157.213:5060→96.9.132.83:3478

I added a firewall rule from this computer to ANY for sip and ssip but same error reported. any idea?

regards


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to equintana
    Hi,
    you have the SIP Security setup incorrectly.

    SIP network is your destination networks eg your ISP's SIP server
    SIP client is you PABX.

    Simple as that.

    With the strict not being ticked you will have all sorts of people registering with your PABX, some of them with fraudulent behavior in mind.

    Ian