This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bittorrent

I have recently installed the ASG v8.1 for home use and I have setup port forwarding in the DNAT section and setup a packet filter rule for bit torrent.  I have also turned off all P2P filtering yet still my torrents take forever to start, do not start at all, or download very slowly compared to when I had just a linksys router.  uTorrent reports  that the port is open and accepting connections.  I got the instructions for opening port on the astaro here: https://community.sophos.com/products/unified-threat-management/astaroorg/f/95/t/67203


This thread was automatically locked due to age.
Parents
  • I set my clients to a specific port to keep the ports opened to a minimum. I also created 4 rules per client which I know is overkill but it is working were before it didn't. two TCP rules one in and one out and two UDP rules one in and one out. using the port defined on my clients. I have a NAT set up per client...    any> specified port> External network>>>torrent client. In my case I tried to run two rules per client but kept getting default dropped so this seemed to be what needed to happen for me and it works so I'm sticking with it.
Reply
  • I set my clients to a specific port to keep the ports opened to a minimum. I also created 4 rules per client which I know is overkill but it is working were before it didn't. two TCP rules one in and one out and two UDP rules one in and one out. using the port defined on my clients. I have a NAT set up per client...    any> specified port> External network>>>torrent client. In my case I tried to run two rules per client but kept getting default dropped so this seemed to be what needed to happen for me and it works so I'm sticking with it.
Children
No Data