Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 2 subscribers
  • Views 7432 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PBX behind ASG

dema
Hi,

On my internal Network I have installed a PBX (trixbox).
Outgoing Calls are working fine, Incoming not!

On the ASG I have configured the VoIP Security (SIP):
SIP server networks > Any
SIP client networks > Internal (Network)

The high ports (Voice) are opened dynamically.
Is this the case also for SIP (5060)?
Since I didn’t open 5060 and outgoing calls are working.

For Inbound Calls I have configured a DNAT Roule but Incoming calls are not working.
What I’m doing wrong?

Thank you for the help
dema


This thread was automatically locked due to age.
Parents
  • 0
    vladi,
    someting I would try:
    - instead having on the "SIP server networks" any, you put in there the sip server only.
    - dissable any other additional rules for voip.
    The idea is that astaro does the rules by itself, also the inbound rules, but if there is any astaro might not do it correct.

    just an idea, cheers
Reply
  • 0
    vladi,
    someting I would try:
    - instead having on the "SIP server networks" any, you put in there the sip server only.
    - dissable any other additional rules for voip.
    The idea is that astaro does the rules by itself, also the inbound rules, but if there is any astaro might not do it correct.

    just an idea, cheers
Children
No Data