Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 1457 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Dual Wan (T1 and DSL)

fsyong
Here is the issue,

I have two ISPs, one has public ip address from T1, one has private ip from DSL.

I created  NAT on T1, but I cannot use the DSL without another NAT rule.

I dont want NAT twice on the DSL line. 

Also I use the uplink with multipath, but I tried to tracert  the packets and find I was always using the T1 line. 

How can I check the load balancing?

Thanks,


This thread was automatically locked due to age.
Parents
  • 0
    Hi, and welcome to the User BB!

    You should be able to put your DSL modem into bridge mode so that you can put its public IP on the Astaro.

    Uplink balancing with mulltipath works well.  Usually, the problem people have is with the traffic selector in the multipath rule.  What traffic do you want to go over the DSL line?

    Cheers - Bob
Reply
  • 0
    Hi, and welcome to the User BB!

    You should be able to put your DSL modem into bridge mode so that you can put its public IP on the Astaro.

    Uplink balancing with mulltipath works well.  Usually, the problem people have is with the traffic selector in the multipath rule.  What traffic do you want to go over the DSL line?

    Cheers - Bob
Children
No Data