This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

NAT Confusion

I've read several of the Post on NATing and I'm sorry to say that I'm even more confused from the early days of NATing.  Maybe because I didn't need a DMZ at that time.  Anyway here we go: ASG 320 V8 3 Ports 1 Public, 1 DMZ and 1 Private.  
Public 66.142.x.x
DMZ 10.100.x.x
Private 10.x.x.x
Trying to set up a NAT for SMTP to go from Public IP to server in DMZ for scanning spam, virus and such to the Private IP of the actual mail server. The server in the DMZ needs to be able to communicate with TCP and SMTP for updates to software and such.

The new version 8 software has DNAT, SNAT and Full NAT (I used to just have to deal with DNAT, One rule in one out)  So in comes the confusion
Which NAT? What is the Source Translation and what is the Destination Translation.
I figure if I get this I should be able to understand how ASTARO does nating because the documentation that came with it was shy in explaining this

Thanks in advance.


This thread was automatically locked due to age.
Parents
  • Sorry it took so long to reply.  Question 1 The DMZ is a subnet of the private.  What I forgot to put in the IP layout was the bits so the DMZ is a 24bit/Class C scheme where my internal private is a 16bit/Class B.
    You are correct on my goal
    SMTP outbound does not currently go through DMZ, but will so the SPAM server can monitor and add HAM to its Hueristics.
Reply
  • Sorry it took so long to reply.  Question 1 The DMZ is a subnet of the private.  What I forgot to put in the IP layout was the bits so the DMZ is a 24bit/Class C scheme where my internal private is a 16bit/Class B.
    You are correct on my goal
    SMTP outbound does not currently go through DMZ, but will so the SPAM server can monitor and add HAM to its Hueristics.
Children
No Data