Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 2 subscribers
  • Views 1177 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG 7.504: QoS Problem

rbasukala
I have ASG 7.504 installed on server. We have 6Mbps bandwidth for my office and want to limit users to have 500 kbits/s as an guaranted bandwith and 2000kbits/s (2Mbps) as an upper limit bandwidth.

QoS configuration in detail.

Under Status Tab:
- status of external interface is enabled
+ Limit uplink, selected
+ Download Equlizer, selected
+ Uplocad optimizer, selected

Traffic selector:
- Internet --> Any --> UserNetwork

Bandwidth Pool:
- Interface: External
+ Name: Ineternet2UserNetwork
+ Position: 1
+ Bandwidth(kbit/s): 500
+ specify upper bandwidth limit, SELECTED
++ Limit(kbit/s): 2000
+ Traffic selecter: Selected from above

I also tried different other options like external interface instead of internet on traffic selector but it is still not working.

Can someone please help me to find out the problem?

I also looked at manual and looks like the configuration is okay.

Thanks!
RB


This thread was automatically locked due to age.
Parents
  • 0
    Traffic selector:
    - Internet --> Any --> UserNetwork

    You only can make explicit rules for traffic leaving an interface, so that traffic selector only can work when applied to the internal interface.

    Especially when asking for help on QoS, it pays to describe the problem someone is complaining about and the issue/person you think is causeing the problem.  Seeing just a non-working solution makes it hard to help.

    Cheers - Bob
  • 0 in reply to BAlfson
    so, I applied following rule on the internal interface:

    Traffic selector:
    - Internet --> Any --> MyComputerIP

    and tested but it is still not limiting download speed, consuming almost all the bandwidth, causing bandwidth utilization upto 100%

    Thanks!
    RB
Reply
  • 0 in reply to BAlfson
    so, I applied following rule on the internal interface:

    Traffic selector:
    - Internet --> Any --> MyComputerIP

    and tested but it is still not limiting download speed, consuming almost all the bandwidth, causing bandwidth utilization upto 100%

    Thanks!
    RB
Children
No Data