This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

packetfilter issue

I am using dnat..the problem is Astaro is NOT opening the range i am specifying..it is only opneing one port.

Here is the DNAT:

DNAT [bt]
Traffic selector: Any → limewire → Internet (Network)
Destination translation: wtower
Automatic packet filter rule: (enabled)
Initial packets are logged: (disabled)

the limewire is ports 10001-10004
however the only open is 10002. the rest come up as closed to external scans. I need these open. I shouldn't have to manually every one. This just recently stopped working.

Here's the service definition:

limewire TCP/UDP 1:65535 → 10001:10004

This thread was automatically locked due to age.

0 BAlfson over 15 years ago

No hints in the packet filter or IPS logs?

Cheers - Bob
Cancel
Vote Up 0 Vote Down

Cancel
0 William Warren over 15 years ago

ips is off..clues are the logs in that the PF is dropping the packets i have told it not to. even with a manual rule it exhibits this behavior.
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 15 years ago

Can we see a sample line from the full (not Live) log?
Cancel
Vote Up 0 Vote Down

Cancel
0 William Warren over 15 years ago

I have to say now it's resolved itself. Things are flowing through the packetfilter now. Don't know what happened but a reboot cleared it up.
Cancel
Vote Up 0 Vote Down

Cancel
0 William Warren over 15 years ago

and it's back. Cant get any ports to open that i am specifying....will try a reinstall
Cancel
Vote Up 0 Vote Down

Cancel