Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 354 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG 7.903 Hyper-V and Packet Filter issue

meyersmarc
Today I installed ASG 7.903 on a Hyper-V 2008 R2. I created a new inbound Packet Filter Rule for HTTPS. Fro Any HTTPS to Internal IP Address and a DNAT Rule. But the Packet Filter still blocks inbound HTTPS, what I can see in the log..


This thread was automatically locked due to age.
Parents
  • 0
    Hi,

    What type of traffic are you trying to allow? If you are trying to allow https inbound to a webserver, then the destination for the packet filter rule should be the webserver and not the IP of the astaro. It might clear things up if you post the specific nat and packet filter rules you created that are not working.

    Also, if you are using the V8 beta you might want to post in that part of the forum.
Reply
  • 0
    Hi,

    What type of traffic are you trying to allow? If you are trying to allow https inbound to a webserver, then the destination for the packet filter rule should be the webserver and not the IP of the astaro. It might clear things up if you post the specific nat and packet filter rules you created that are not working.

    Also, if you are using the V8 beta you might want to post in that part of the forum.
Children
No Data