This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to configure ASG with 2 XBOX360 consoles

I'm having a difficult time configuring the ASG so that two 360 consoles can go on XBOX Live at the same time.  I followed some of the posts in order to get one console on LIVE but I'm struggling with the second one.

Do I have to clone the DNAT and Packet rules and change the destination IP to match that of the second console?

Thanks,

Jerry


This thread was automatically locked due to age.
Parents
  • **EDIT**

    After posting this it dawned on me that this shouldn't work the way I described. I personally haven't had any issues and I've been using it like this for over year but I honestly couldn't name a time when both 360's were playing online at the same time so if there were issues, I never noticed it. Most of the time, one Xbox was used during the day or weekends when I'm not home. I usually play mine at night.

    Unfortunately I am moving this weekend and will be back to 1 xbox in the house so I don't know if I'll have time to test.

    Here is my config for 2 360s

    I created 2 new servies and gave both Xboxes a static dhcp assignment
    Service 1: Xbox Live 1 - TCP\UDP for port 3074
    Service 2: Xbox Live 2 - UDP for port 88
    Host_Xbox 1 - internal ip
    Host_Xbox 2 - internal ip


    Traffic Source: ANY
    Traffic Service: Group called Service_Xbox and put both Xbox services in there
    Traffic Destination: External Address
    NAT mode: DNAT
    Destination: Xbox 1 ip address
    Automatic Packet Filter rule: checked

    Then just do the same for the 2nd Xbox. 

    Works like a charm.

    Here's another post that goes into it as well

    https://community.sophos.com/products/unified-threat-management/astaroorg/f/54/t/38125


  • I created 2 new servies and gave both Xboxes a static dhcp assignment
    Service 1: Xbox Live 1 - TCP\UDP for port 3074
    Service 2: Xbox Live 2 - UDP for port 88
    Host_Xbox 1 - internal ip
    Host_Xbox 2 - internal ip


    Traffic Source: ANY
    Traffic Service: Group called Service_Xbox and put both Xbox services in there
    Traffic Destination: External Address
    NAT mode: DNAT
    Destination: Xbox 1 ip address
    Automatic Packet Filter rule: checked

    Then just do the same for the 2nd Xbox. 

    Works like a charm.

    Here's another post that goes into it as well



    Ok, I've done all this, and I get a message from Xbox saying Xbox live can connect, but there is some network problem having to do with NAT (moderate).

    I created the 2 services as above, I set a static IP for the xbox, I added packet filter rules (one for each service rather than grouping them, but shouldn't make a difference right?) as listed above... What am I missing?

    Thanks,
    PR
Reply


  • I created 2 new servies and gave both Xboxes a static dhcp assignment
    Service 1: Xbox Live 1 - TCP\UDP for port 3074
    Service 2: Xbox Live 2 - UDP for port 88
    Host_Xbox 1 - internal ip
    Host_Xbox 2 - internal ip


    Traffic Source: ANY
    Traffic Service: Group called Service_Xbox and put both Xbox services in there
    Traffic Destination: External Address
    NAT mode: DNAT
    Destination: Xbox 1 ip address
    Automatic Packet Filter rule: checked

    Then just do the same for the 2nd Xbox. 

    Works like a charm.

    Here's another post that goes into it as well



    Ok, I've done all this, and I get a message from Xbox saying Xbox live can connect, but there is some network problem having to do with NAT (moderate).

    I created the 2 services as above, I set a static IP for the xbox, I added packet filter rules (one for each service rather than grouping them, but shouldn't make a difference right?) as listed above... What am I missing?

    Thanks,
    PR
Children
No Data