This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to configure ASG with 2 XBOX360 consoles

I'm having a difficult time configuring the ASG so that two 360 consoles can go on XBOX Live at the same time.  I followed some of the posts in order to get one console on LIVE but I'm struggling with the second one.

Do I have to clone the DNAT and Packet rules and change the destination IP to match that of the second console?

Thanks,

Jerry


This thread was automatically locked due to age.
Parents
  • I'm not familiar with The XBox live system.  But if you need to get two systems running you will have to have the second machine on a different port or port range.  I don't know if this is possible, but if it is, you set the port for the second machine to a different range then copy your current settings that work for machine one to the new ports and the ip of the second machine.

    Hope you get it working.


    ----------------------
    Danny
    the Astaro Guy - Home
Reply
  • I'm not familiar with The XBox live system.  But if you need to get two systems running you will have to have the second machine on a different port or port range.  I don't know if this is possible, but if it is, you set the port for the second machine to a different range then copy your current settings that work for machine one to the new ports and the ip of the second machine.

    Hope you get it working.


    ----------------------
    Danny
    the Astaro Guy - Home
Children
  • I have been trying to figure this out myself. Xbox live uses UDP port 3074 so we need a way that when unsolicited packets come into ASG it knows which console to send the the packet to. I know routers that have UPNP can accomplish this we just have to figure out how to duplicate that on the ASG

    Ralph