This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Strange behavior: iSCSI file transfer over ASG crashes

Hello everybody,
I have the following configuration:

DMZ (10.0.0.2, running Win2k3)  eth1 (10.0.0.1) ASG 7.501 (192.168.0.1) eth0  storage server (192.168.0.2, running Linux)

The DMZ is running in a XEN environment, the link between 10.0.0.2 and 10.0.0.1 is a dedicated VLAN (port-based). 
On firewall, the 10.0.0.2 is allowed to access 192.168.0.2 over iSCSI (port 3260).
I can connect from DMZ to storage server with help of Microsoft iSCSI initiator and I am able to copy files too, BUT: if I copy a file larger than ~35 MByte, the opened iSCSI connection crashes, means the transfer of the file cancels and underlying services are crashed although.
After that I am not able to re-open a connection from DMZ to storage server.

You might say: Woah, this is a fault of Windows - this was my first thought too.
But I tried another configuration (direct DMZ (10.0.0.2)  storage server (192.168.0.2), port based VLAN) and everything works fine.

So I assume that the ASG / packet filter has a problem with high traffic, cache overflow or some kind of that.
Do you have any suggestions or ideas?

Thanks in advance,
Christopher


This thread was automatically locked due to age.
Parents
  • Hey Barry, thanks for the reply.

    If I start the file transfer, snort does not show any peaks on top.
    I tried your suggestions with exceptions and disabled IPS but the result was the same: the file transfer crashed.
    Do you have any other ideas?
Reply
  • Hey Barry, thanks for the reply.

    If I start the file transfer, snort does not show any peaks on top.
    I tried your suggestions with exceptions and disabled IPS but the result was the same: the file transfer crashed.
    Do you have any other ideas?
Children