Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 2 subscribers
  • Views 4065 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need to route an external IP

nosil
Hi there,

I try to explain my need I have.

First of all, I have an ASG220 with the Firmware 7.405.

What I need to do is, to grant access from an external IP to an internal specific IP address.

Exemple:

AAA.AAA.AAA.AAA is the external IP
BBB.BBB.BBB.BBB is our public (visible) IP address
CCC.CCC.CCC.CCC is the target internal IP address to reach.

How can I configure this, that the person from the A IP address can open a remote session on the C IP address?

I hope that I was clear enough and sorry if this thread already exist.


Thanks in advance

NoSiL


This thread was automatically locked due to age.
Parents
  • 0
    Please show the definition of CAM_Survey.

    In the DNAT pictures, you blacked out the names.  I can understand concealing the 'Destination', but I would have expected the 'Traffic Source' to be "Any" instead of something specific.

    When you don't change the Service, you should leave 'Destination Service' empty.
  • 0 in reply to BAlfson
    Here the Cam_Survey definition:

    Cam_Survey

    For security reason, I prefer define the traffic source with a specific Ip, that never will change, so it doesen't matter the "any".

    I will test the empty field for "Destination Service".
  • 0 in reply to nosil
    Hi Nosil,

    I noticed the corresponding DNAT rule being on position "5".
    What about the first four rules? Any overlap?

    Same with the packet filter: Could you post a screenshot of your packet filter config?

    Regards,
    Thomas
Reply
  • 0 in reply to nosil
    Hi Nosil,

    I noticed the corresponding DNAT rule being on position "5".
    What about the first four rules? Any overlap?

    Same with the packet filter: Could you post a screenshot of your packet filter config?

    Regards,
    Thomas
Children
  • 0 in reply to tbrandl
    Hi guys...

    Sorry for the delay.

    I found the problem. I've bound one network to the wan instead of the lan.

    I changed this and now everything is working now.

    Thanks a lot for your help. [:)]

    Have a nice day.

    NoSiL