This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ASG blocking port 21 inbound

I've just recently come across a strange issue. After applying 7.403. I can't seem to connect to my FTP server from the outside world.
I used to be able to. I can connect from a machine on my internal network to the FTP server in the DMZ. But external users cannot.
I have a the usual DNAT (Any->FTP(21)->External address) --> (FTPServer)
I've also tried it with the auto matic paket filter rule and with a manually created packet filter rule (Any-FTP(21)-FTPServer, allow).
But I still see port 21 getting dropped in the packet filter logs.
Is this a new problem with 7.403?

Now I just figured out it's dropping inbound port 443 as well. These inbound ports have been working flawlessly since I set up ASG many moons ago.


This thread was automatically locked due to age.
Parents
  • As it turns out, after the last reboot, ASG never renewed its external IP address. I could surf the web and everything else, but the external address said 0.0.0.0 and that the interface was down. I tried hitting the renew button, but it failed. I had to unplug and replug the external interface wire. It got an IP and everything is working now.
    Strange stuff. Surfing and inbound email on port 25 was working fine.
  • 7.403 has some problems with DHCP on the external interface. This could be what caused your problem.
    If it happens again, try a static IP on external, or go back to 7.402 until Astaro can fix it.

    Barry
Reply
  • 7.403 has some problems with DHCP on the external interface. This could be what caused your problem.
    If it happens again, try a static IP on external, or go back to 7.402 until Astaro can fix it.

    Barry
Children