Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 207 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing Problem

ashkan
Dear all,

I have a problem with routing in astaro.
My scenario is:
I have an ASG-525.
I want to add these four routes.is it possible?
route 10.x.x.1    ---> 10.x.x.13
route 10.x.x.119 ---> 10.x.x.13
route 10.x.x.124 ---> 10.x.x.13
route 10.0.0.0/8 ---> 192.168.134.2
I set one 10.x.x.x ip on one of eth(eth7).
what order of rules does astaro use in routing table?

thank you.
Ashakn


This thread was automatically locked due to age.
  • 0
    Ashkan, it sounds like you know your way around a Cisco router.  You can do a lot of line-by-line coding in the Astaro, but you will miss out on the things that make it so powerful and adaptable.  Perhaps we can give you a better answer if you explain some things to us:

    What is at 10.x.x.1?  .13?  .119?  .124?

    What is at 192.168.134.2?

    Is at 10.0.0.0/8 the subnet on the internal interface of the ASG?  If not, what is that subnet and what is the IP of the internal interface.

    Cheers - Bob