Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 3171 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

QoS VoIP

Simon Shaw
As I understand it, I can select voip using the following selector for RTP traffic?

Src ANY
Dst ANY
Service ANY

DSCP-Bits
DSCP Value
Value set to 46

And for SIP, same but value = 26

Correct????


This thread was automatically locked due to age.
Parents
  • 0
    i might be a little slow, but when service is set to "any," how exactly are you prioritizing RTP traffic.  From the looks of that rule, you are prioritizing everything.
  • 0 in reply to BanksDad
    I'm probably slow too.

    First time I've played with DSCP.

    If the VoIP equipment tags the headers with a DSCP code, then, can Astaro select the traffic based on these added tags in the packet headers? (Thereby selecting the traffic).

    Or do I need to add the service type as well? (H323)

    Or, by selecting H323 then setting DSCP am I changing the H323 packets to have the DSCP codes added?

    Confused...
Reply
  • 0 in reply to BanksDad
    I'm probably slow too.

    First time I've played with DSCP.

    If the VoIP equipment tags the headers with a DSCP code, then, can Astaro select the traffic based on these added tags in the packet headers? (Thereby selecting the traffic).

    Or do I need to add the service type as well? (H323)

    Or, by selecting H323 then setting DSCP am I changing the H323 packets to have the DSCP codes added?

    Confused...
Children
No Data