I just setup ASG 7.1 recently on an old Compaq box at home and am now trying to setup my Slingbox for remote viewing with no success. I can view it on the computers in the network perfectly, however I can't seem to get it working externally. It worked fine this way when I just used my Airport Extreme as the firewall, so I know it can be done, and I suspect my port forwarding attempt has some error in it. Here is what I have done:
1) Created Slingbox as a Host
Went to Definitions > Network > New Definition and set it up as:
Name: Slingbox
Type: Host
Address: 192.168.2.103
Interface: Any
2) Created a Slingbox Service
Went to Definitions > Services > New Service Definition and set it up as:
Name: Slingbox
Type of Definition: TCP/UDP
Destination Port: 5001 (Default for Slingbox)
Source Port: 1:65535
3) Setup DNAT Definition
Went to Network Security > NAT > DNAT/SNAT > New NAT Rule and set it up as:
Name: Slingbox
Traffic Source: Any
Traffic Service: Slingbox
Traffic Destination: External WAN (Address)
NAT Mode: DNAT (Destination)
Destination: Slingbox
Service: Slingbox
As for the Slingbox, it is setup with a 192.168.2.103 as its static internal IP and port set at 5001.
Based on the information I have read, this should work. Any reason why this is not working? Thanks in advance for your help!
This thread was automatically locked due to age.
