Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 2 subscribers
  • Views 1664 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Beating my head against this NAT/DNAT issue

weeeezzll
I have a web server on a local IP (192.168.1.22).  It's public IP (67.177.108.222) is added as an additional address on Astaro's public interface.  There is a DNAT rule that Translates ALL-HTTP-[67.177.108.222] to [192.168.1.22].  I then have a Packet Filter that allows ALL-HTTP-[192.168.1.22].

This works great for the outside world, but my internal NAT'd workstations cannot get this web page to load.

What am I missing?


This thread was automatically locked due to age.
Parents
  • 0
    I have also setup (in an attempt to debug) two packet filter rules.

    ALL-ALL-[192.168.1.22] Allow/Log
    ALL-ALL-[67.177.108.222] Allow/Log

    I don't see anything in the packet filter logs, and the web page still won't load from NAT's workstations.
Reply
  • 0
    I have also setup (in an attempt to debug) two packet filter rules.

    ALL-ALL-[192.168.1.22] Allow/Log
    ALL-ALL-[67.177.108.222] Allow/Log

    I don't see anything in the packet filter logs, and the web page still won't load from NAT's workstations.
Children
No Data