Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 1436 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless Configuration

jamesb_01
I am new to Astaro and am having some difficulty setting up a wireless network.  The internal network is operating properly.  I have setup a wireless network and am able to have clients get DHCP addresses from the firewall box.  I am a bit confused about what all rules need to be set in order to allow clients on the wireless network to get to the Internet.  Any assistance would be greatly appreciated.


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to BarryG
    I have configured three network interfaces all on the firewall box

    1.WAN
    2. Internal 192.168.1.X
    3. Wireless  192.168.2.X

    All Packet filter rules were setup by the wizard.  There are no rules setup on the wireless interface.  Originally I could not access the internet or the LAN interface from the wireless interface.  However, I set the (Network-->DNS-->Global) setting and added the wireless network.  I am now able to access both the LAN and WAN.  Is this configured properly.  How do I set up rules for the wireless interface.  I tried to set up a rule to deny all packets from the Wireless to the WAN, but it did not seem to have an effect.
  • 0 in reply to jamesb_01
    Your deny rule should be to ANY, not WAN
    e.g.
    Source WirelessNet, Dest ANY, DENY

    Barry
  • 0 in reply to jamesb_01
    you need to set up masqureading...

    masqurade from wireless to WAN

    so by right u should have 2 masq rules

    1) internal - wan
    2) wireless - wan