This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Xbox Live and ASL

Hi, im running the home user version of asl, and i love it ! However, I bought an xbox 360 and it cant connect to xbox live through astaro.

In the checks that the xbox does it passes on the interface,ip addresss,dns, and fail's on MTU. According to Micro$oft the MTU needs to be above 1364 and my inside MTU is at 1500 and Outside is at 1492 on astaro.

If I use pppo-e with my dsl modem (Which astaro normally uses on the outside NIC) and only the xbox  its fine. So astaro is clearly the problem.

Any ideas?

Cheers


This thread was automatically locked due to age.
Parents
  • I have yet to get this to work with multiple XBOX on the internal network. I can easily name a DNAT that ships the traffic off to ONE XBOX, but that seems to leave the other XBOX in the cold.

    There certainly should be a way to configure NAT + packet filters correctly for multiple XBOX. Although I've tried every combination I can think of...

    How do you handle a case where you have multiple machines on the internal network that need to use the same ports/service?

    Most other aapplications like this I've used just handled the NAT part automatically for this type of situation. So I'm a little bit at a loss.

    Jason
  • @JasonJoel
    Do you try to set to each XBOX a own manual IP and then you create a DNAT/SNAT for each XBOX. Maybe this helps.

    DNAT [XBOX Live]
    Traffic selector: Any → XBOX Live → External (WAN) (Address)
    Destination translation: XBOX360
    Automatic packet filter rule:
    Initial packets are logged:

    The Packet Filter you can create like post from
    fatwreck15
    https://community.sophos.com/products/unified-threat-management/astaroorg/f/54/p/38125/129769#129769

    Lg
    Elena
Reply Children
No Data