This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Asterisk PBX and Astaro FW Configuration

If you are using Asterisk PBX or Asterisk@home could you please tell me how you setup your ASL to work with Asterisk PBX?


This thread was automatically locked due to age.
Parents
  • Dear Friend,

    Well, I use both of them but independly, but just to notify that you that you should allow the port 5060, which is used by SIP protocol.

    By the way, do you have an ATA machine ? What it is ?

    Regards,
  • ATA machine? ATA is usually mentioned in context with serial ATA drives or raid. So I guess ATA machine could mean a computer with serial ATA drives and possibably serial ATA raid. 

    You say you use both independently of each other. Please explain?
    Do you mean you have the Asterisk PBX running by itself on the internet, and not being protected by your firewall? If this is the case you have a sip soft phone or an ip phone connecting to the Asterisk box? 

     I believe I need these ports forwarded on my ASL firewall to my Asterisk server. But I do not want to leave ports 10,000 to 20,000 open. Is there a better way to enable sip? 

     SIP 5060-5063
     RTP 10000 20000
  • ATA = Analog Telephony Adapater . For changing your normal phone set into a VoIP set. When ATA is mentioned during a talk of VoIP, that is what is meant.
Reply Children
No Data