This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

does QoS work correctly?

Hi List,

I have here ASL version 6.004.

At the external interface QoS is activated and for Uplink/Downlink in each case 2048Kbits.
Likewise "monitor interface usage" activated for 95% UP/down.
The rules for QoS were changed.
Rules for VPN high priority, all other rules low priority.

As it works QoS does not look at all. One sees the following.

Although the external interface has more than 95% traffic, no notifications sent .
Although the VPN connections has high priority, other connections receive the whole bantwith.

Why? Is there possibly a problem because the external interface 20 IP Aliasse has?
One sees the following in the QoS log, all the same whether high or low traffic.

Chain POLICY_ROUTING_OUT (1 references)
 pkts bytes target     prot opt in     out     source               destination         

Chain POLICY_ROUTING_PRE (1 references)
 pkts bytes target     prot opt in     out     source               destination         

Chain PREROUTING (policy ACCEPT 6611K packets, 5537M bytes)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 ULOG       icmp --  *      *       0.0.0.0/0            0.0.0.0/0           length 20:21 ULOG copy_range 40 nlgroup 1 prefix `INVALID_PKT: ' queue_threshold 50 
    0     0 ULOG       icmp --  *      *       0.0.0.0/0            0.0.0.0/0           icmp type 5 ULOG copy_range 40 nlgroup 1 prefix `ICMP REDIRECT: ' queue_threshold 50 
6567K 5520M POLICY_ROUTING_PRE  all  --  *      *       0.0.0.0/0            0.0.0.0/0           
  106  6072 ULOG       all  --  *      *       0.0.0.0/0            0.0.0.0/0           state RELATED helper match "ftp" ULOG copy_range 40 nlgroup 1 prefix `FTP_DATA: ' queue_threshold 50 

Chain INPUT (policy ACCEPT 1549K packets, 753M bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain FORWARD (policy ACCEPT 5062K packets, 4785M bytes)
 pkts bytes target     prot opt in     out     source               destination         

Chain OUTPUT (policy ACCEPT 1519K packets, 752M bytes)
 pkts bytes target     prot opt in     out     source               destination         
1519K  752M POLICY_ROUTING_OUT  all  --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain POSTROUTING (policy ACCEPT 5410K packets, 5081M bytes)
 pkts bytes target     prot opt in     out     source               destination         
 887K  436M ACCEPT     all  --  *      lo      0.0.0.0/0            0.0.0.0/0           
 260K   14M SET_PRIO_HIGH  tcp  --  *      *       0.0.0.0/0            0.0.0.0/0           tcp flags:0x10/0x10 length 50:100 
  343 36676 SET_PRIO_HIGH  all  --  *      *       0.0.0.0/0            0.0.0.0/0           TOS match 0x10 
 2997  268K SET_PRIO_HIGH  icmp --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain SET_PRIO_HIGH (3 references)
 pkts bytes target     prot opt in     out     source               destination         
 156K 8270K CLASSIFY   all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           CLASSIFY set 2:8 
 156K 8270K ACCEPT     all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           
 107K 6507K CLASSIFY   all  --  *      *       0.0.0.0/0            0.0.0.0/0           CLASSIFY set 0:8 
 107K 6507K ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           

Chain SET_PRIO_LOW (0 references)
 pkts bytes target     prot opt in     out     source               destination         
    0     0 CLASSIFY   all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           CLASSIFY set 2:5 
    0     0 ACCEPT     all  --  *      eth1    0.0.0.0/0            0.0.0.0/0           
    0     0 CLASSIFY   all  --  *      *       0.0.0.0/0            0.0.0.0/0           CLASSIFY set 0:5 
    0     0 ACCEPT     all  --  *      *       0.0.0.0/0            0.0.0.0/0           

--------------------------------------------------------------------------------------


--------------------------------------------------------------------------------------


--------------------------------------------------------------------------------------


Possibly someone an idea?

Stefan


This thread was automatically locked due to age.
Parents Reply Children
  • [ QUOTE ]
    William,
    you are right. As is the case for the turn signal at the car.
    Works, works not. Works, works not.  [:S]

    Stefan 

    [/ QUOTE ]

    Let me say that for basic things such as prioritizing a VOIP ATA and deprioritizing P2P traffic, I could never get AStaro V5 or V6 to work effectively.  No one from Astaro even commented on the fact that it seemed to be broken.

    I have since moved on to Monowall, who has a web configuration GUI that is quite simple, and a extremely capable QoS capability.  My VOIP now works flawlessly even as a ton of bittorrent uploading is going on.  

    I wish Astaro worked properly, but at least for what I needed it to do, it was not adequate.

    Thanks,
    Mike
  • [ QUOTE ]
    [ QUOTE ]
    William,
    you are right. As is the case for the turn signal at the car.
    Works, works not. Works, works not.  [:S]

    Stefan 

    [/ QUOTE ]

    Let me say that for basic things such as prioritizing a VOIP ATA and deprioritizing P2P traffic, I could never get AStaro V5 or V6 to work effectively.  No one from Astaro even commented on the fact that it seemed to be broken.

    I have since moved on to Monowall, who has a web configuration GUI that is quite simple, and a extremely capable QoS capability.  My VOIP now works flawlessly even as a ton of bittorrent uploading is going on.  

    I wish Astaro worked properly, but at least for what I needed it to do, it was not adequate.

    Thanks,
    Mike 

    [/ QUOTE ]
    Astaro got awfully quiet when i brought up the QOS's shortcomings.