Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 2 subscribers
  • Views 6608 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Connection Tracking Table

DanielC
If I would like to know what connections are currently in use, I use (or used in Version 5) the connection tracking Table. Now, in version 6, this lists almost nothing. Off the more than 1500 open connections at this moment. only 34 are listed in the table. What is wrong/where can I see the whole list)?
This is very important as it was/is the only way to track a misbehaviour from one of the clients on the inside


This thread was automatically locked due to age.
Parents
  • 0
    Is this a silly question or does nobody knows were to look or what is missing here?

    Yesterday the smtp proxy stalled because "too many open connections" but the connection tracking table showed only 11 entries at that moment. So something is wrong here!
  • 0 in reply to DanielC
    Am I the only one suffering from this problem?

    MY tracking table just seems to stop after x characters

    e.g.

    6:10.0.128.4:193.190.214.253:80:12590:193.190.214.253:134.184.2.6:12590:80
    6:10.0.128.4:193.190.214.253:80:12583:193.190.214.253:134.184.2.6:12583:80
    6:10.0.128.4:193.190.214.253:80:12576:193.190.214.253:134.184.2.6:12576:80
    6:10.0.128.4:193.190.214.253:80:12784:193.190.214.253:134.184.2.6:12784:80
    6:10.0.128.4:193.190.214.253:80:12850:193.19

    At this moment we have more then 600 concurent connections but the table showing only 27 lines.

    Could somebody either acknowledge this problem or tell me that there is no problem. SO atleast I know wether it is a bug or something else.

    Thanks

    Danil
  • 0 in reply to DanielC
    That does seem strange. I'm still running 5.206 so I can't help much however I don't recall seeing that when I was testing V6 during the beta.
  • 0 in reply to doug_p
    Hi Doug_p
    I recreated the firewall on another machine and I get the same problem. The problem does not exist in version 5 (also tested)

    I updated to the latest version, same problem.

    Daniel
  • 0 in reply to DanielC
    Hi,
    I think you need to tick the auto update box at the top of the page, that is what I found.

    Ian M [:)]
Reply Children