Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 372 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing to a subnetwork

Martial_01
Hello,

I have 2 subnetworks:
a) 192.168.0.x (local)
b) 192.168.10.x (remote) (going through a netscreen and third 10.10.10.x private network)

Request from subnet a) are channeled an ok. Request from b) are received by Astaro, but answer to request are not forwarded to the remote subnetwork.

Can u give me a hint in term of steps to follow to make it work?
thanks
MaX


This thread was automatically locked due to age.
  • 0
    oh I did this and will try it but let me know if it is right:

    In Definitions, Network:
    1) add host with internal IP of the Netscreen
    2) add network with IP/netmask of the remote subnetwork

    In Network routing:
    a) add a static route with network being hereabove 2) and target the hereabove 1)...

    Will it work?
     [:S]
  • 0 in reply to Martial_01
    Should; traceroute tells all (ICMP options must be enabled...)

    If you are not doing address translation on Astaro to that network, and the network number behind Astaro iis not 'known' to the NetScreen, you might have to add a route to Netscreen to know where to pass such numbered packets back.

    Just do it and repost if you stall your engine...