Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 2259 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

voice over IP Setup

amp10000
Has anyone here set up voip with astaro version 5. I ordered att call vantage and I'm trying to get the RT41P2 Linksys phone adaper slash router to work behind my astaro box.


This thread was automatically locked due to age.
Parents
  • 0
    Hi amp10000

    I am using Vonage (but I have the Cisco ATA-186) behind ASL 5.027.  It works great.  The only config change I made was to add it's IP address to the high-QOS.  I've read that you might have to forward/allow a couple ports to handle tftp, but I didn't have to.

    HTH,
    Greg
Reply
  • 0
    Hi amp10000

    I am using Vonage (but I have the Cisco ATA-186) behind ASL 5.027.  It works great.  The only config change I made was to add it's IP address to the high-QOS.  I've read that you might have to forward/allow a couple ports to handle tftp, but I didn't have to.

    HTH,
    Greg
Children
  • 0 in reply to Greg_DePasse
    I just got VOIP from AT&T.

    Apparently TFTP is used forAT&T to send ROM updates to the VOIP adapter, so it's suggested by some to forward it to the adapter.

    However, the AT&T manual doesn't mention that, so it must not be very important.

    Apparently no other ports need to be forwarded. I'm not sure how it gets incoming calls.

    Barry