Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 2 subscribers
  • Views 6278 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Public IP behind ASL

Chad
Are there any good example on how to set up aDMZ which contains public addresses behind ASL, as well as a private address space??

So ASL would do NAT/Masq for privte lan to a single external IP, and servers would have public addresses behind ASL in DMZ??

Thanks,
Chad


This thread was automatically locked due to age.
Parents
  • 0
    How have you think to have public ip behind fw?
  • 0 in reply to Overnet
    I requested a public IP from my ISP for my external interface.

    Then created DMZ on ASL by adding a NIC, assigning it one of my private IP's (203.11.69.1)  Attach that to a switch, attached public IP boxes to switch, done [:)]

    Next add packet filter rules.  You will have to let the ISP know that you need to route to your public DMZ via the IP they assign you.
Reply
  • 0 in reply to Overnet
    I requested a public IP from my ISP for my external interface.

    Then created DMZ on ASL by adding a NIC, assigning it one of my private IP's (203.11.69.1)  Attach that to a switch, attached public IP boxes to switch, done [:)]

    Next add packet filter rules.  You will have to let the ISP know that you need to route to your public DMZ via the IP they assign you.
Children
No Data