This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Ping / ASL Initial Configuration

I have recently reinstalled Astaro 4 because I added another nic for a DMZ. Since the installation I have not been able to ping anything by ip address or domain name.  HTTP proxy is working and I can get to the Web.

Some question I have:

When I do a ipconfig /all from my workstation on the internal network should the default gateway, DHCP server and DNS server all be 192.168.2.100 (the address of my INTERNAL nic on my ASL box)?  If not what should they be?

Under the Interfaces page in WebAdmin should I see gateways displayed for the DMZ and INTERNAL interfaces?

Why can't I ping anything?

Any help you could give me would be very appreciated.  Below is the relevant configuration information.  Thank you.

INTERFACES:  (DSL/PPPoE) - all in state up
    DMZ on eth1  10.10.10.0/255.255.255.0 gateway:none
    EXTERNAL on eth2 209.193.42.xxx/????? gateway:assign
    INTERNAL on eth0 192.168.2.100/255.255.255.0 gateway:none

NAT: INTERNAL NETWORK_ -> ALL/ALL MASQ_INTERNAL none

DHCP:
     DNS SERVER1 192.168.2.100
     GATEWAY  192.168.2.100

PACKET FILTER:
     RULES     INTERNAL_NETWORK_  ANY ANY ALLOW
     ICMP        ICMP FORWARDING ENABLED

DNS PROXY:
     Interface to listen on: INTERNAL
     Allowed Networks:  INTERNAL_NETWORK_
     Forwarding Name Servers:             1) 209.193.4.7 (ISPs)
                                                         2) 209.193.4.8 (ISPs)  


This thread was automatically locked due to age.
Parents Reply Children
No Data