Hi Folks,
I'm currently evaluating Astaro as a replacement for a Sonicwall. We have 4 Class C addresses, and I've subnetted one Class C (226) over eth1 eth2 and eth3 (eth0 is the management interface). eth1 is the Internet Interface, eth2 the LAN, and eth3 the DMZ. eth2 is connected to an internal router that handles the three LAN Class C's (120,119, and 227). I can get outside no problem when using a masquerade rule for each LAN class C. However, no inbound traffic is being allowed except on eth1 even though I have Any Any Any Allow rules set up in the packet filter. eth1 accepts pings and I can ssh into ASL from the outside world via eth1.
What routing entry do I need to make to be able to access the stuff on eth2 and eth3?
Here's the table:
Destination Gateway Genmask Flags Metric Ref Use Iface
x.x.226.38 0.0.0.0 255.255.255.255 UH 0 0 0 eth2
x.x.226.64 0.0.0.0 255.255.255.224 U 0 0 0 eth2
x.x..226.32 0.0.0.0 255.255.255.224 U 0 0 0 eth1
x.x..226.224 x.x.226.70 255.255.255.224 UG 0 0 0 eth2
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
x.x.120.0 x.x.226.70 255.255.255.0 UG 0 0 0 eth2
x.x.119.0 x.x.226.70 255.255.255.0 UG 0 0 0 eth2
x.x.227.0 x.x.226.70 255.255.255.0 UG 0 0 0 eth2
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 x.x.226.34 0.0.0.0 UG 0 0 0 eth1
This thread was automatically locked due to age.
