Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 2319 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Close Ports 25/80/81/82/83/110/1080/5190/8080

laslo
Hi,
i set up a Astaro V4 with. Here is my configuration.

1. NIC : 192.168.130.1 inet_interface (Gate: 192.168.130.254)

2. NIC : 10.20.30.1 wlanap_interface(Gate: none)


WLANClient(10.20.30.241/Dial up VPN on 10.20.30.254  he gets IP from the Pool )-------WLAN AP(10.20.30.250)------2.NIC(10.20.30.254 PPTP Enable(IP POOL 10.130.122.0)) (NAT Rule: PPTP Internet   PPTP-Pool -> All / All  MASQ__inet   None 
Packet Filter: PPTP-Pool Any inet_Network_  Allow )-----1 NIC (192.168.130.1)-----Router(192.168.130.254)---Internet

So the client get Internet access over WlanPtPP this works fine but when i scan the 2NIC (from 10.20.30.241) these Ports are open 25/80/81/82/83/110/1080/5190/8080. I disable ICMP on firewall and want to add Packet Rules that 2te NIC only respond when he gets an VPN PtPP  request. But this dosen´t work also when i add the Rule:
wlanap_network Any wlanap_interface Any.

Thanks for help 

 
   


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to firebear_01
    thanks for your help the Rule "Any-> Any-> 2te nic_network->drop" works fine.
    The Roadwarrior Access also  is working fine without adding any more Rules.  

    These are my Rules
    PPTP-Pool ->Any-> inet_Network-> Allow
    Any-> Any-> 2te nic_network->drop 

    Thanks

    laslo