This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setting up DMZ

Hi,

I'm about to set up a DMZ for one of my servers (FTP).

I wonder if it will work, even though i only have one external IP from my ISP?

My thoughts:

eth0: 192.168.0.XXX (LAN)
eth1: 217.XXX.XXX.XXX (ISP)
eth2: 192.168.4.XXX (DMZ)

Is the above possible? If i have one server. Should i set the local ip for that server to the same as eth2 above?

What if i want 2 servers (FTP and WEB) . What ip would the second server use?

Thanks in advance

/ Martin

This thread was automatically locked due to age.

Parents

0 Overnet over 21 years ago

Yes you should set up static ip fot both servers you wan´t in dmz like 192.168.4.1 192.168.4.2 for an ex. And you must set up dnat rules for you servers and some filters to get it works. Hope you have more now.
Cancel
Vote Up 0 Vote Down

Cancel
0 lejzer over 21 years ago in reply to Overnet

Hi,

I get it. But if i use 192.168.4.1 and 192.168.4.2 for the servers in the DMZ. What ip and subnet should the interface for the DMZ be like?

Thank you!
Cancel
Vote Up 0 Vote Down

Cancel
0 Overnet over 21 years ago in reply to lejzer

The ip for DMZ can be like 192.168.4.100 and netmask 255.255.255.0 but you can use with ip for DMZ you like so long it not use same ip like you´r web or ftp servers in same subnet
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 Overnet over 21 years ago in reply to lejzer

The ip for DMZ can be like 192.168.4.100 and netmask 255.255.255.0 but you can use with ip for DMZ you like so long it not use same ip like you´r web or ftp servers in same subnet
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data