Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 541 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Help Please

Pluto
Can somebody help with this? Please!!!!     

My e0 IP=192.168.2.100, e1 (external IP)= 192.168.1.102
MY station IP=192.168.2.102

How do access the external  network from my station?  (I know have to set up the Gateway somewhere, just don't know where)  

Thanks for your help   


This thread was automatically locked due to age.
Parents
  • 0
    On your workstation you will need to specify the ETH0 interface as your gateway.  You will then need to create a MASQ rule that states ETH0 NETWORK -> MASQ -> ETH1 INTERFACE.  Then, you need to create your packet filter.  You can start with what's called an "ANY ANY" rule.  You basically configure the Filter the same way as the MASQ rule from earlier.  ETH0 NETWORK -> ANY, ANY SERVICE 
  • 0 in reply to Chris Lynch
    Thank you, I will try it and let you know how it goes.

        
Reply Children
No Data