Hi i'm tring to configure QoS, and i've readed all post in the forum to configure it but i haven't success: I want to configure a badwidht limit for each workstation in my internal net. this is my net configuration:
10.0.0.55(internalMachine)-->Astaro(eth0/internal:10.0.0.254)(eth1/external:192.168.0.100)--->router(192.168.0.138)--->ADSL
I've create a definition for the 10.0.0.55 machine using 255.255.255.255 netmask. My ADSL line is 1024Kb. I configure QoS for the eth1 on 1024 link, 1 reserved, 1500 mtu.
After i added a qos rules: from alex-->any serv-->External_network, low, don't borrow. I'll hope the client 10.0.0.55 has limited bandwith but NO.
Please help me, i ve tried differet configuration but not success..
this is service rules:
eth1
Class 1
Total link bandwidth.
Min. BW: 1Mbit
Max. BW: 1Mbit
Class 10
Reserved Bandwidth for unshaped traffic.
Min. BW: 1Kbit
Max. BW: 1Mbit
Class 11
Min. BW: 1023Kbit
Max. BW: 1023Kbit
Filter:
Source 10.0.0.55/255.255.255.255
Destination 192.168.0.0/255.255.255.0
This thread was automatically locked due to age.
