Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 2 subscribers
  • Views 1389 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need Help Fast! PLEASE!!!

alexmigl
I have a problem where my 2 networks only talk in one direction.

e0 10.1.x.x 255.x.x.x no gw
e1 194.x.x.243 255.x.x.x gw 194.x.x.243

route 10.1_interface to 194_interface
route USA-LAN to 10.X.X.41 (a VPN DEVICE TO USA)

The UK can see all of the USA LAN
but the USA LAN cannot see anything on UK SIDE.

Can anyone help?

     


This thread was automatically locked due to age.
Parents
  • 0
    do they have an appropriate rule?

    however having an interface (e1) with a gw pointing to itself would not make much sense...

    cheers
    /marcel

    PS: in case you reply on this, please try to specify more details on your setup.. thx 
Reply
  • 0
    do they have an appropriate rule?

    however having an interface (e1) with a gw pointing to itself would not make much sense...

    cheers
    /marcel

    PS: in case you reply on this, please try to specify more details on your setup.. thx 
Children
  • 0 in reply to Marcel_01
    If the UK can "see" the USA (I assume with ping or the like), this would suggest that IP is working, and that a rule (or lack of) is filtering the traffic when initiated from the USA.
    Can you try adding a couple of rules (temporarily) that will allow all traffic between the two networks? You can then restrict it down to the services you need.