Have just finished installing a new firewall which is working fine. Only problem is the graphs show up all read and the values are 0. I thing that this is because I had the wrong date on the system to start with. Is there an easy way to remove all the data collected with the wrong date and start collecting the data again from now. The machine has been installed in a remote office so I will need to beable to correct it with the webadmin if possible.
Helps if you look through the other posts first!!! Found a post with a similar rpoblem and found a comment about Putty SSH for win32 (dont have another linux box on the lan). Using putty I was able to delete the mrtg log & old files and then do a /etc/rc.d/snmpd restart and it looks like the graphs are being built correctly now.
Helps if you look through the other posts first!!! Found a post with a similar rpoblem and found a comment about Putty SSH for win32 (dont have another linux box on the lan). Using putty I was able to delete the mrtg log & old files and then do a /etc/rc.d/snmpd restart and it looks like the graphs are being built correctly now.
