This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to access NATed server using WAN addr. from LAN

I should have read the FAQ where it is written that this problem has basically no solution... Has anyone ever succeeded solving this problem anyway ?


This thread was automatically locked due to age.
Parents
  • I have a network 192.168.1.0/24 with one server 192.168.1.1/24, NAT/Masq rules are as this:

    LAN_Masq   LAN -> All / All  MASQ__eth1
    SrvNAT   Any -> Srv_WAN / Any   None Srv_LAN  
    where eth1 is my WAN interface, LAN is 192.168.1.0/24, Srv_WAN is for ex. 23.23.23.23 and Srv_LAN is 192.168.1.1

    From LAN, I can access Srv using 192.168.1.1 but not using 23.23.23.23.

    What route or NAT rule must I add to allow access 23.23.23.23 from my LAN ?

    Thanks in advance
     
     [size="1"][ 03 October 2002, 12:38: Message edited by: Antoine Duchateau ][/size]
Reply
  • I have a network 192.168.1.0/24 with one server 192.168.1.1/24, NAT/Masq rules are as this:

    LAN_Masq   LAN -> All / All  MASQ__eth1
    SrvNAT   Any -> Srv_WAN / Any   None Srv_LAN  
    where eth1 is my WAN interface, LAN is 192.168.1.0/24, Srv_WAN is for ex. 23.23.23.23 and Srv_LAN is 192.168.1.1

    From LAN, I can access Srv using 192.168.1.1 but not using 23.23.23.23.

    What route or NAT rule must I add to allow access 23.23.23.23 from my LAN ?

    Thanks in advance
     
     [size="1"][ 03 October 2002, 12:38: Message edited by: Antoine Duchateau ][/size]
Children
No Data