Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 2 subscribers
  • Views 1163 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DNAT not working...what am I doing wrong?

Knight
Im not sure, but you may have to set the packet filter to allow it to "External1" as well as Internal1...


This thread was automatically locked due to age.
Parents
  • 0
    Ok here is what I have done:
    First I added the IP to the external nic card (this is a alias)
    168.103.x.x

    Then I made to define's in network:
    external1 168.103.x.x 255.255.255.255
    internal1 10.10.11.17 255.255.255.255

    Then I create my DNAT
    Source Address: No Match
    Destination Address: external1
    Service: SSH

    Change Source to: 
    Address: No Change

    Change Destination to:
    Address: internal1
    Service Destination: No Change (I also tried it with ssh).

    After that I added the Packet Filter Rule of:
    Any SSH internal1 Allow 

    So what am I doing wrong here?
  • 0 in reply to natas
    BTW this is on the latest version of ASL, not 2.x.

    I have done this a ton of times with version 2.x and never had a issue....has something changed with the new version?
Reply Children
No Data