Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 1165 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

dmz problems

ollion
acollin,

check your cabling and make sure that all interfaces
are connected to different devices. 
Have a look at /var/log/kernel to find out on which
interface it happens.

regards
ollion


This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to squeeze
    I agree with squeeze.

    Can you put your DMZ on a different subnet, maybe a 10.10.0.0 /16. Then creat dnat rules to access the DMZ. you may need to use aliases if your ISP has assigned you a different subnet for public IP addresses
  • 0 in reply to lanman
    Thanks for the help, I knew there was a easy answer.

    One other question, now the dmz is working (I can ping from it) I'm unable to reach my gateway.  I can ping the external interface on the ASL, 65.x.y.3, but cannot ping the gatway on the router 65.x.y.1.  Again I know this is probably a simple question, but I'm not seeing a solution
  • 0 in reply to acollin
    Did you setup a rule to allow outbound traffic from your dmz

    DMZ ANY ANY Allow
Unfiltered HTML