Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Webmin/SSH hangups

We have experienced some oddities with our Astaro system.  Perhaps someone can shed some light on the issues.

Our internal network is masqueraded to the outside world.  Everything seems to be working OK, except for odd hangups with SSH and Webmin.

At any given time while using Webmin, one will click on a button to perform an action and the browser will just hang for a minute or two.  It seems to eventually recover and complete the action, but it does take well over one minute.  I assume that the web browser has re-tried the connection and it eventually succeeded.  If I click on the desired action button several times, Webmin eventually responds.  If this hang-up action happens enough, Webmin eventually locks up and needs to be restarted.

SSH seems to work fine, except when one logs off.  About 50% of the time, the connection is not properly closed and my SSH client needs to be terminated.  There are also the odd pause in communication that does not appear to be traffic related.

If I use a computer that is not masq'ed through the Astaro box, none of these issues occur.

ttfn.


This thread was automatically locked due to age.
Parents
  • Hello Tim Rosenquist,

    do you use INTEL based NICs?
    Are there entries like this in /var/log/kernel?

     
    quote:
      
    Nov 28 04:13:11 my-wall kernel: eth1:     1 00000001.


    read you
    o|iver
  • Hi,

    i made the experience that every change in the paket filter section is followed by an restart of FreeS-WAN . This kills my SSH Session (IPSEC-IF) every time. 

    Take a look at the syslog messages and the IPSEC Life Logging.

    Is there any possibility to choose the time of FreeS-WAN restarting ?

    bye
    Claus

    NIC's: Intel Pro Dual  +  SMC
  • The NICs are 3Com, a 3C905c and a 3C900B.  As it turns out, it may be an odd routing issue with our ISP.  They claim it is our firewall though.  We are still testing.
  • From a box inside or outside your network just do a ping -t and see if it will start losing packets or see if the timing is slow.  Does webadmin hang INSIDE the network or just outside?
  • I think that i have the same problem.
    SSH takes 2 min for the promt to show.
  • Hello, I have had similar problems with 3Com cards with ASL. The problem was the card could not negotiate full/half duplex. You can manually force them to go to full duplex with `insmod 3c59x full_duplex=1`. My connections were taking forever, or even timing out. In the end it turned out to be a cable causing all the trouble. I wouldn't rule out the driver for the 3com's included with ASL (uses kernel 2.4.5 as a base) being the problem.
  • In response to SSH taking a long time to show the prompt, it is possible that it might be possible that it is trying to reverse lookup your address.
Reply Children
No Data